C.C.JENSEN - the global leader in oil maintenance with more than 60 years of experiences - designs and manufactures CJC® Oil Filtration solutions for removal of particles, water, acidity and oil degradation products (varnish) from hydraulic oils, cooling circuits etc.
Plastic moulding machines are highly complex production machines, and reliable equipment is the key to maintaining a high output of finished goods. A wide range of hydraulic components, such as pumps and proportional valves are used to make the plastic moulding machine perform to it's optimum. The small tolerances between components in the hydraulic system make it critical to keep the oil clean and dry, and free from oxidation residues.
Relying solely on in-line filters in plastic moulding machine is a high risk strategy. In doing so, the hydraulic system risks being subjected to many particles in varying size that can lead to expensive downtime, loss of efficiency in production output and lower quality products. If the oil in the hydraulic system is not clean, then you risk extra wear on the hydraulic components and unplanned breakdowns in production. If you do not keep the oil free from oxidation residues, then you risk much shorter lifetime of the oil and sticking valves during start-up. All lead to increased downtime and higher cost of operation.
Benefits, installing CJC® Oil Filters
Keeps your plastic moulding machines fit for operation
Maintain high process stability and efficiency
Reduce risk of unplanned breakdowns and maintenance
Ensures long lifetime of expensive hydraulic system components
Extend hydraulic oil lifetime with a factor 3-4
When you install a CJC® Oil Filter solution on your plastic moulding machine, you get a very effective oil filter with the highest dirt capacity suitable for system with high levels of particles or oxidation residues. This way you do not need to stop production untimely to service the oil filter. Technically, CJC® Oil Filter is known for keeping oil clean, dry and without oxidation residues, which is documented over many years and in numerous plastics production installations. When you choose CJC® Oil Filter, you ensure a long lifetime of the hydraulic components, reduce maintenance costs and avoid unplanned breakdowns. Hydraulic oil lifetime can be extended with a factor 3-4, and you can even monitor from the central monitoring location the condition of your system using the Oil Contamination Monitor (OCM).
Many sizes of CJC® Oil Filters are used for the plastic molding industry:
Fine Filters from size HDU 15/12 up to HDU 27/108 series
Oil Contamination Monitor, OCM15
The CJC® System Solutions fit all hydraulic plastic moulding machines, and we can deliver globally where required. In close co-operation with technical organizations, we help select the most fitting solution depending on system type and conditions in the environment.