In an industry full of grey areas and black books, what is “right” anyway? John Lobozzo, Technical Sales Engineer at RJG Technologies, walks us through his eight top principles for an effective injection moulding process.

Whether you’ve been directly involved in the injection moulding industry or not, plastic parts have accompanied you your whole life, if we count the rattle and dummy that gets thrust upon us moments after entering the world. One thing that has become apparent is, despite how widespread injection moulded parts are, it’s amazing how haphazard and lacking training can be in the industry and how under-invested and under-skilled the whole industry has been historically. Though improving, this problem is still in the main.

Injection moulding machines are usually kept well past their sell-by date, paying for themselves multiple times over. They are sometimes leaky rust buckets still able to essentially print money for their owners after 20 years. While we walk around with computing power in our pockets which can send 120 million Apollo spacecraft to the moon all at the same time, some of us have to make do with injection moulding machines that look like Olivetti prototypes.

It’s a false economy as worn machines, however normal, contribute to processes that teeter on a knife-edge and produce intermittent faults which cost money and hurt the planet.

Training is initially a case of “follow them around on the job” until a training group is created or budget is available. Can you imagine that scenario with electricians, surgeons, or airline pilots?

New projects in injection moulding often start with good intentions but get swept up in a tidal wave of “just get it done; we don’t have the luxury of waiting for that.” Poor planning and poor collaboration are felt later in months and years of narrow process windows and “trick moulding,” leaving the hapless technician with a problem job that just won’t go away. Technicians are often left just guessing, and worryingly they have the full authority to do so. This puts at risk mould tools and machines, costing hundreds of thousands of pounds, not to mention their own safety.

So, there are a lot of inefficient things going on, but on the other hand, many companies are also doing it right. In an industry full of grey areas and black books, what is “right” anyway?

Here are my 8 essential principles for injection moulding from the start to end of the process:


1. First and foremost, make sure everyone is adequately trained to do their job BEFORE starting a project or going near a machine or mould tool.

2. Get everyone who’s going to be involved (toolmakers, designers, quality, technicians, simulation engineers, customers, etc.) together at the start of a project. Quality time invested in initial planning will save a huge amount of money and time later.

3. Do not skip steps or ignore stakeholder’s input. Each stakeholder should be respected and input considered. For example, we often pay a lot of money for a Moldflow report just to use it as a “tick in the box” and totally ignore it. Join the dots.

4. DATA, DATA, DATA. Get as much as possible from everywhere when setting a process, and use all the technology that is available. We have £1000 smartphones in our pockets but nothing to help us with one of the trickiest materials in any industry to process. Instrument the machine and mould tool where possible.

5. Set an optimised process which is in accordance with the initial steps in the project and at least checked against simulation results and fed back. Use machine-independent variables for simulation and machine transfer-ability.

6. Identify problems early and challenge what was agreed in previous steps if necessary. For example, get the material or mould tool sorted out, don’t put up with compromises or the cheap and easy option. Buy cheap, buy twice.

7. Store the process parameters and parts for reference. Quality and process stability should be paramount. Cycle time not exceeding budgeted!

8. After completion, reflect on the project together with stakeholders and evaluate and value anything that didn’t go as planned as an opportunity for improvement next time. Often, you need to stumble to prevent a fall.

All easy to say, huh?  So why isn’t this happening every time? Oh yeah… we were too busy!

RJG Technologies are an award-winning training and process support organisation, specifically focused on injection moulding. RJG also believe that having a highly-skilled and adaptable workforce has never been more crucial, given the current climate.

Why Choose RJG Training?

With over 100 years of combined experience in scientific moulding from the plastic’s point of view, our consultants transfer their knowledge as well as share their industry and consulting experience with our students. As a result, RJG training graduates can deliver substantial time and cost savings to their employers, whether it is through developing new products or managing existing projects.

Many employers also now use our training program to fast-track mechanically inclined, motivated entry-level personnel into higher-level technical positions, thus saving recruitment time and money.

Online training courses are also available in some cases. For more information about the training courses at RJG, and for availability and booking information, visit the RJG Website.

RJG Technologies logo
RJG Technologies
+44 (0)1733 232211